Hot Tub parts sold to trade professionals

Balboa Ozone CD without Chip (New Model)

ON OFFER

Part Code: OZ-BA101

Availability: More than 100 in stock

You might also like...

  • Product Description
  • Delivery
  • Returns
Type of Product: Ozone Generator
Manufacturer: Balboa
Box Quantity: 12
Power: Volts: 230Hz: 50
How it Works: This Ozone activates, usually, during a pre-programmed filter cycle, some Hot Tubs have a 24hr circulation and Ozone mode. We recommend that your Ozone should run for between 6 and 8 hours a day. The unit does not blow air, air is drawn through the Ozone on a venturi system. Usually, you will find a designated water jet plumbed into the shell of the Hot Tub somewhere near the centre or sometimes a drain. Water will pass through the jet sucking in air through the Ozone injector which will be connected to the Ozone. During a filter cycle, the Ozone unit will be powered up, the Corona Discharge mechanism will kick in and charge the oxygen with Ozone which enters the tub and in turn, helps to kill bacteria with the aid of the sanitizer in the water.
Compatible With: This unit can be fitted to virtually any Hot Tub with a venturi system. Can be used with Spaform, Aegean, Leisurerite, Leisure Bay, Hotspring, Sundance, Marquis, Master Spa, Signature, Southwest Spas, Hydrospa, Hydropool, QCA, Sunset, Sunrise, Sunbelt, Beechcoomber, LA Spas, Dimension 1, Saratoga, Emerald Spa, Sapphire Spas and more...
Connections / Fixings: Usually screws to an upright up as high as it can go. We advise that there should be a double air loop with a one-way valve (included) to stop water passing back through. The Ozone pipe is clear and can usually insert into a 3/8 inch air pipe connected to your venturi system, this will push fit on to the Ozone unit. The ozone comes with a 3-wire, 4-pin AMP cord but can easily be swapped over with your original cable or by the adapter in related items below if needed.
Dimensions: Length: 78 mm Width: 67 mm Depth: 35 mm
Additional Notes:

THIS IS THE NEW BALBOA OZONE AND A  REPLACEMENT FOR THE OLD MODEL OZ-BA100.

 

Life span is generally 2-3 years depending on use

7 Delivery of Goods to you

7.1 We will deliver the Goods ordered by you to the address you give us for Delivery at the time you make your Order

7.2 Our Standard Delivery time is two to five working days from Order processing. Our Fast Delivery service is one to two working days; SPA PARTS VORTEX will rely on the postal services of Royal Mail, Parcel Force Worldwide and other couriers. Our stated Delivery services are a guide only. We will always aim to ensure your Order is received on time but we will not be held liable for Late Delivery beyond our control or consequential loss. All our Deliveries will be tracked and your Tracking Number will be available on request

7.3 You will become the owner of Goods you have ordered when they have been delivered to you. Once Goods have been delivered to you they will be held at your own risk and we will not be liable for their loss or destruction

Click here to read our full terms and conditions

9 Warranty

9.1 All items and products supplied through this website have a twelve month Warranty from date of delivery. Incorrect installation will result in withdrawal of the Warranty. This Warranty covers the cost of the parts and postage only consequential indirect losses eg: labour expenses, loss of earnings or damages will not be the responsibility of SPA PARTS VORTEX. If a replacement part for defective Goods is no longer available within the Warranty Period an alternative will be offered or a partial refund

9.2 As of July 1st 2014 all electrical items are granted with a fifteen month warranty when purchased directly by a registered trade account holder. This is to enable the trade customers to benefit from a three month shelf life and then a full twelve month fitted guarantee

Click here to read our full terms and conditions