Davey SP800 PCB is designed for use with the Spa Power SP800 control box, supporting pumps, blower, heater, ozone, light, and more. It is compatible with the SP800 topsides.
Features:
- Dimensions: 223mm (L) x 125mm (H)
- Power: 230V AC / 50Hz
- Pump 1: 1 x two speed
pump OR 2 x Single speed pumps (P1A, P1B)
- Pump 2 : 1 x single speed pump or 1 x single speed blower
- Air Blower: Single Or Variable Speed
- Small 24hr circulation pump
- Ozonator
- Heater: x 1
- Light: x1, 12 volt, up to 4 LED Variable colour pool lights
- Pool temperature
- Sleep times
- Filtration cycle
- Clean up cycle
Compatibility:
- SP800 control box and topsides
Box Quantity: 1 unit per box.
Notes:
Please note we cannot accept wrongly ordered returns that have been fitted.
This PCB is used as a replacement for an existing SP800 control box with a PCB failure. This must not be fitted to any other device/product. This should be done by an experienced tradesman or a competent individual as a faulty install could result in board damage and invalidate the warranty.
